2x2 Fiber Optic Switch without connector

2X2 optical switch Unmatched Low Cost Low Insertion Loss High Channel Isolation Epoxy-Free Optical Path

2x2 Fiber Optic Switch without connector : 

Features	Applications
Unmatched Low Cost Low Insertion Loss High Channel Isolation Highly Stability and Reliability Epoxy-Free Optical Path	Configurable Optical ADD/DROP Optical signal Routing System Monitoring Instrumentation

   Specifications

Parameter	Specification
Operating Wavelength (nm)	1310± 40 or 1550±40		1310/1550 ± 40
Insertion Loss (dB)	P Grade	A Grade	P Grade	A Grade
	< 0.6	< 0.8	< 0.8	< 1.0
Wavelength Dependent Loss (WDL) (dB)	≤ 0.25	≤ 0.25	≤ 0.30	≤ 0.30
Polarization Dependent Loss(PDL) (dB)	≤ 0.05	≤ 0.05	≤ 0.05	≤ 0.05
Temperature Dependent Loss (TDL)(dB)	< 0.20	< 0.25	< 0.20	< 0.25
Channel Cross Talk (dB)	>55	>55	>55	>55
Repeatability (dB)	< ± 0.02
Return Loss (dB)	> 55
Switching Speed (ms)	<10 (Typ.4)
Coil Resistance (Pin 1-5 or 6-10) (ohms)	178 ± 10%
Operating Voltage (V)	5
Power Handling (mW)	500
Operating Temperature(°C)	0 ~ +70
Storage Temperature (°C)	-45 ~ +85
Fiber Type	SMF-28
Fiber Length (m)	1.0 +/- 0.1
Physical Dimension (LxWxH) (mm)	32.76 × 12.6 × 11

Electrical Pin Configuration:

Optical Path		Port1 To Port3/Port2 To Port4		Port1 To Port4/Port2 To Port3
Electric Drive	Non Latching	Pin1	Pin10
		V+	GND	GND	V+
Sensor Status	Non Latching	Pin2-3, Pin8-9 Open		Pin2-3, Pin8-9 Close
		Pin3-4, Pin7-8 Close		Pin3-4, Pin7-8 Open

Dimensions:   Ordering Information:

SMS	Sensor Status	Operating Wavelength	Port	Grade	Fiber Type	Fiber Length	In/Out Connetor
	N=Non Latching	15=1550±40nm 13=1310±40nm 35=1310/1550nm	0202=2x2	P=P Grade A=A Grade	1=Bare Fiber 2=900um Jacket	1=1 Meter 2=2 Meter	0=None 1=FC/APC 2=FC/PC 3=SC/APC 4=SC/PC 5=ST 6=LC

2x2 Fiber Optic Switch without connector